Cincinnati Precision Instruments, Inc. provides Precision Measuring Tools,
Surveying Equipment, and Related
Calibration, Repair and Training Services

Cincinnati Precision Instruments, Inc. | Calibrating to a Higher Standard
Cincinnati Precision Instruments, Inc. | Calibrating to a Higher Standard
Products
& Services
Precision Gages and
Other Measuring Tool Sales
Survey Equipment Sales
and Repair Services
Precision Instrument
Calibration Services
Calibration Training ServicesPrecision Instrument
Repair Services
Product CatalogTool Receiving FormEmployment Opportunities
Gage Calibration Training Class

A2LA AccreditedIndi-Check\

Calibration Training Services

Calibration training and repair services

Cincinnati Precision Instruments,Inc. offers an intensive 3 day "hands-on" training for the calibration of physical dimensional gages such as calipers, OD/ID/depth micrometers, length standards, dial and digital indicators, snap gages, height gages and bore gages. Other gages may be covered as class time permits and based on the needs of the participants.

Participants bring gages representative of those that they certify on a daily basis and all class members learn proper calibration techniques from each other as well as from the instructor.

COST: $1,695.00 PER PERSON
*Price includes materials, and a completion certificate.
WHERE: All classes are held in our training facility in Cincinnati.
RESERVATIONS: Class size is limited to six participants. We encourage you to register quickly by calling Katie Whitaker at 1-800-686-3730, faxing her at (513) 874-2536 or email kwhitaker@cpi1stop.com with a purchase order stating participant's name.
*CPI reserves the right to reschedule the seminar dates if a minimum of three participants are not registered for any class.
*Full registration fee will be refunded IF WRITTEN NOTICE IS RECEIVED one week prior of the scheduled class.
CLASS DATES:

August 22-24, 2017        Sept. 19-21, 2017        October 17-19, 2017        November 14-16, 2017

CLASS TIMES:

8:00 AM to 4:00 PM EST

Gage Calibration and Minor Repair Training includes:

  1. Outside Micrometers
    • a. Mechanical and Digital
      • i. How to read a mechanical micrometer
      • ii. Anvil Parallelism and anvil alignment
      • iii. Calibration using gage blocks and Mic-Trac
      • iv. Disassembly and cleaning the threads
      • v. Federal Standards and tolerances
      • vi. Temperature effects
    • b. Micrometer Standards
      • i. Cleaning
      • ii. Checking straightness
      • iii. Tolerances
      • iv. Calibration
  2. Depth Micrometers
    • a. Mechanical and Digital
      • i. Cleaning measuring surfaces
      • ii. Checking base flatness
      • iii. Checking rod straightness
      • iv. Calibrating and adjusting rod lengths
      • v. Federal Standards and tolerances
  3. Inside Diameter Micrometers
    • a. Temperature effects
    • b. Checking rod straightness
    • c. Checking end caps for proper dimension and flats
    • d. Calibration using Mic-Trac
    • e. Federal standards and tolerances
  4. Calipers
    • a. Vernier
      • i. Cleaning
      • ii. Checking the beam
      • iii. Adjusting and properly setting the gib screws
      • iv. Checking OD and ID jaw parallelism
      • v. Calibration using gage blocks and Mic-Trac
    • b. Dial and Digital
      • i. Cleaning and checking the rack
      • ii. Checking the beam
      • iii. Adjusting and properly setting the gib screws
      • iv. Checking OD and ID jaw parallelism
      • v. Minor repair of the OD and ID jaws
      • vi. Setting the dial hand back to 12 o'clock position
      • vii. Checking ID-OD variance
      • viii. Calibration using gage blocks and Mic-Trac
  5. Indicators (Dial, Digital, and Test)
    • a. Proper use of
    • b. Checking for proper operation
    • c. Cleaning the rack
    • d. Checking and replacing the crystal
    • e. Checking for hysteresis
    • f. Federal standards and tolerances
    • g. Calibration using Indi-check
  6. Bore Gages
    • a. Checking for proper operation
    • b. Checking for flats on contact points
    • c. Accuracies and tolerances
    • d. Calibration using Indi-check
  7. Holetests
    • a. Cleaning and checking for proper operation
    • b. Accuracies and tolerances
    • c. Calibration using ring gage standards
  8. Groove Micrometers
    • a. Cleaning and checking for proper operation
    • b. Combined thickness and parallelism of discs
    • c. Accuracies and tolerances
    • d. Calibration using ring gage standards
  9. Miscellaneous
    • a. Granite Surface Plates
    • b. Torque Wrenches

back to top

Copyright © 2011 Cincinnati Precision Instruments, Inc., All Rights ReservedSite created by ThomasNet Web Solutions
azla accredited UKAS