| |
Cincinnati Precision Instruments is partnered with QC Training Services to bring you the technical training needed to support your manufacturing efforts. In addition to our standard Gage Calibration Methods workshops, we are now offering the basics of blueprint reading, GD&T and measurement uncertainty workshops.
In addition, we are now bringing you CORE TOOLS training - APQP, PPAP, FMEA, MSA and SPC. Take each one as a Public Class offering, or bring on-site for a 5-day seminar. We can support your training needs.
|
MEASUREMENT SYSTEMS
ANALYSIS | |
$845 | 2 Days |
This program provides a fundamental and practical review of
Measurement Systems Analysis. MSA is an excellent quality tool to use with any
quality system and has direct application to ISO/IATF 16949. This course is
recommended for anyone involved in quality planning or involved in the
implementation of ISO/IATF 16949 and third-party auditors. Reference the
complete Course Description and Agenda for additional details.
Dates:
June 20 - June 21, 8:00 am - 4:00 pm |
BLUEPRINT READING FOR
INDUSTRY |
|
$950 | 2 Days |
| This basic print reading program explains the importance of
engineering drawings in manufacturing and thoroughly describes the generation
and duplication of such drawings. It discusses the basic elements of a
blueprint and introduces the concepts which students must master to
successfully interpret engineering drawings. No prior knowledge of drafting or
drawing is assumed. This blueprint reading training covers the principles of
shop sketching, basic review of shop mathematics, and use of common measuring
tools. |
|
GD&T FUNDAMENTALS | |
$845 | 2 Days |
This program is a complete introduction to the Y14.5M-1994
and Y14.5-2009 standards. The gap between designers and measurement personnel
is closed. The concepts are introduced to both groups, from two different
angles. Design and Inspection techniques are examined that will greatly
increase knowledge of inspection methods
Dates:
June 6 - June 7, 8:00 am - 4:30 pm |
GD&T ADVANCED |
|
$845 | 2 Days |
This program is a continuation of your education in the
Y14.5 standard. There will be discussions about being able to identify both
correct and incorrect drawings with GD&T. In this program, we focus on the
application and interpretation of GD&T – another step closer to becoming a
GD&T expert.
Dates:
June 8 - June 9, 8:00 am - 4:30 pm |
|
MEASUREMENT
UNCERTAINTY BUDGETS (MUB) | |
$845 | 2 Days |
QC Training Services’s Measurement Uncertainty Budgets class
is perfect for calibration technicians, quality managers, engineers, quality
technicians, and other users of uncertainty budgets. All measurements are
subject to uncertainty and a measured value is only complete if it is
accompanied by a statement of the associated uncertainty. This class will help
you calculate the probability of the uncertainty and ensure your measurement
system is compliant with ISO 17025. Covered in the training will be basic
terminology, basic statistical concepts, computations and correlations, as well
as how to analyze and interpret data. Within this class we will also review the
ISO Guide to the Expression of Uncertainty in Measurement (GUM).
Dates:
June 22 - June 23, 8:00 am - 4:00 pm |
|
Quality 101 Foundational Concepts |
$845 | 2 Days |
| This class is designed to spark a fire for the love of Quality through an introduction of what quality is and its benefits. This class explores the main areas of Quality - foundational concepts and vocabulary, basic tools and methods, and tools that can be applied on the job immediately. |
DIMENSIONAL MEASURING TOOLS BASIC USAGE AND UNDERSTANDING |
|
$845 | 2 Days |
| Basics class is an introduction to some of the most common gages used on the shop floor. The purpose is to provide practical instruction on the different tools available and their proper use to build workers' skill and knowledge. |
To register or for more information, email Steve Plymire.
513.874.2122
253 Circle Freeway Dr.
Cincinnati, OH 45246
|
|
| |
|